Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 08:46

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

At least they know the answer if they wanted it.

He then asserts :

[image of Common-mode choke]

Ethane Exporter Says U.S. Won’t Allow Shipments to China - WSJ

There are two important concepts here.

what exactly is a ‘surge’ protector?

An AC voltage/ current source, and an ac inductive load.

How do you recognize when your mental health might need attention?

nine

Barnstars:

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Romania in the past was a poor country, but last year the government announced it had 521 billion leu (113$ billion dollars) revenue. Why is so much? What's the reason?

The third is lightning and “how it gets conducted into a home.”

He then describes Rainy Season and Lightning.

The other is “what does a “fuse” do?”

Tim McGraw's daughter Gracie McGraw comes out as queer: 'Happy freaking Pride' - USA Today

2024–10–16 [ OO OLAOYE OYEBODE ]

a photo is worth a thousand words.

He then describes the function of a fuse.

Trump’s budget puts Huntsville-made spacecraft on the chopping block - AL.com

There are three different concepts here that are getting confused.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

China Auto Body Slams ‘Vicious Competition’ After BYD Price Cuts - Bloomberg

At one ohm, the resistor has a maximum of 1 watt power.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

so, what happens?

Simone Biles calls Riley Gaines 'sick' over criticism of transgender athletes - NBC News

[old diagram got deleted by accident]

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

but this device (an Inductor) … impedes the rapid changes in the current.

What is the degree of influence of Saudi Wahhabism on the modern Muslim world?

For this case there are devices called Metal oxide varistors (MOV).

The bolt then partially travels down the line to your home.

Upvotes:

Why was Super Buu so afraid of having Fat Buu torn out and becoming Kid Buu if he was going to destroy the Earth even before his transformation?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Sega Throws Shade At Mario Kart While Showing Off Sonic Racing: Crossworlds - Kotaku

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Edit 2024–10.

A circuit breaker is similar, but is resettable.

How did Kate Mulgrew feel about Jeri Ryan joining the cast of Star Trek: Voyager?

It seems Mohan does not understand the difference between a comment and an Answer.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

An Invisible Force Has Been Eating Away at Mars for Centuries… and NASA Finally Caught It - The Daily Galaxy

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

I post the exact comment here.

Anthropic Researchers Warn That Humans Could End Up Being "Meat Robots" Controlled by AI - futurism.com

Here is a simplified AC power diagram.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

How did Nickelback gain a large fan base despite criticism of their music?

One

It also is a device that limits the change in current flow.

This is 'the assistant's answer'

Why does Christianity push reconciliation after a partner cheats? Mine had a 7-year affair with someone half my age. He cheated and lied. He is not the same to me.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

These are simplified answers to the original question, and does not change anything I wrote above.

What does a fuse do?

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

First Sentence:

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is where the MOV conducts again, and dissipated the energy.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This device then solves the entire problem.

(Dc diagram shown, AC is similar).

Now when you have a certain ac resistance, then a current flows in a loop.

In schematic diagrams this is the symbol for a fuse:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

One is “what exactly is in a ‘surge protector’ ? ”

A fuse is a non-resetable over current circuit protector.

2024–10–14 [Omar Gharbi Omar Gharbi ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

But… the neutral is now “floating” because of the 1 ohm resistance.

But it can get overloaded, and no longer works.

This one hit behind the barn.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

eight

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Because the load is inductive, the current lags the voltage.(by a bit).

What is lightning?

but I think this circuit , shows a few more pieces.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–10[John johnson John Johnson ]

the problem then depends on "how fast does the fuse operate?".

These devices are installed between the “hot” and “neutral” and protective ground.

So, the voltage could go up to 500 volts, and the fuse will not open up.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.